Finally a playground deck repair solution that works.

Cracked and damaged playground decks are a common sight in old playgrounds. They may seem benign, however these sharp, rusted edges create a shear hazard to children playing on the equipment. Traditionally, maintenance personnel have either replaced the entire deck or used liquid rubber, caulk and sealers to repair the damaged and dangerous deck. These methods have been expensive, intrusive and unsuccessful as the deck surfacing cracks and flakes. We  have developed the only guaranteed, long lasting playground deck repair solution. Our kit is made out of the same vinyl coating that is used to make the playground surface at the factory. It is an air actuated system that doesn’t need to be mixed with any other products to apply. It is a do-it-yourself solution that will save you money and time. The kits are brought to you by Trassig Corp. A company known for its playground surfacing repair products

Before repair

After Repair

Can I text you or email you pictures of my deck damage for advise?

Absolutely. Trassig is made up 100% of seasoned installers that are happy to give you the best advise on how to tackle your deck repairs. Text the pictures of the damage to: 203-200-7881 or email them to info@trassig.com

How is the playground deck repair kit packaged?

The playground deck repair kit comes in 1 Quart containers that will cover areas of approximately 8 square feet. The small packaging is crucial as the product dries very quickly. You will not be able to work with larger sizes as most of the product will go to waste if it was shipped in larger containers.

How do I repair my playground deck?

1. Choose a warm and dry day for your repair. Temperatures over 40 degrees are recommended.
2. Prep the damaged area by making a clean cut around it with a utility knife and cleaning it using mineral spirits
3. Make sure the area is dry
4. Open your playground repair kit and using a putty knife apply small amounts at a time to the repair area
5. Keep working the area and smoothing it with the putty knife until you get a consistent, level surface
6. Do not open more containers than needed to repair the area you are working with. Once you open the containers, the content will dry quickly.
7. Allow area to dry for 24 hours.

What if I need to patch a vertical surface?

For large surfaces as well as vertical surfaces, we highy recommend using our primer first. Apply the primer with a cheap brush after you have done all your site prep. Let it sit for about 15 minutes, then apply your deck repair kit.

Is the deck repair surface paintable?

Yes. We recommend the Rust-Oleum Painter’s Touch 2X Ultra Cover spray paint

Can I use the deck repair kit to repair benches and picnic tables?

If they are made out of plastisol, then, yes you can.

Can I cover the entire surface of a playground deck?

Yes you can, but this is not easy to do.

Can I trowel your deck repair over a rusty playground deck?

We do not recommend you do so. You need to neutralize the rust first. The point of the deck repair kit is to avoid rust buildup because of exposure to the elements to begin with.

How do I order the playground deck repair kit?

• Visit the products page and select your preferred color to place an order online. (This is by far the fastest way to order).
• Call us at 203-659-0456 to place your order online. We are open between 9 am and 5 pm ET.
• Email your purchase order to: info@trassig.com,